-->
 

Flip Your Text

Asli

Terbalik

Full Codes For Samsung Phones

Jumat, 07 Mei 2010 *#06# -> Displays imei
*2767*5282# -> Java Reset and (Deletes all Java Midlets)
*2767*63342# -> Reset Media (Deletes All Sounds and Pics)
*2767*927# -> Wap Reset
*#9998*4357# -> Help Menu
*#9998*5282# -> Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# -> Monitor Mode
*#9999# or *#9998*9999# -> Software Version
*#8888# or *#9998*8888# -> Hardware Version
*#9998*746# or *#9998*0746# or *#0746# -> Sim Infos
*#9998*523# or *#9998*0523# or *#0523# -> Display Contrast
*#9998*842# or *#9998*0842# or *#0842# -> Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# -> Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# -> Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# -> Sim Service table
*#9998*782# -> show date and alarm clock
*#8999*638# -> show network information
*#9998*5646# -> change operator logo at startup
*#9998*76# -> production number
*#9998*968# -> view melody for alarm
*#9998*585# -> Non-Volatile Memory (NVM)
*#3243948# -> Digital Audio Interference Off
*#32436837# -> Digital Audio Interference
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.
*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*427# -> Trace Watchdog
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*785# -> RTK (Run Time Kernel) errors
*#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version
*2767*2878# -> Custom EEEPROM Reset
*2767*3855# -> Full EEPROM Reset
This code will remove sp lock in some models
But also changes IMEI to 447967-89-400044-0,
____________________________________________
Samsung A300, A400, A800
*2767*637#
____________________________________________
Samsung E500, E700
*2767*688#
In newer phones:
#*7337#
____________________________________________
Samsung E715
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
____________________________________________
Samsung M100
Type *#9998*627837793#. Then type *#9998*737#. Press >/[] (Play Stop) until phone shows NCK/SPCK number. Press Exit.
Type #0111*CODE# (Code is the last 8 digits of the NCK/SPCK)
____________________________________________
Samsung P400
*2767*3855#
In newer phones:
*2767*927#
____________________________________________
Samsung S100, S300
*2767*7822573738#
____________________________________________
Model: Samsung S105
Remove Simcard. Enter *2767*7822573738# and after phone reboots, enter #0111*00000000#
____________________________________________
Samsung s300 unlock code
enter these 5 codes without sim card in phone!
your phone should then be unlocked
1. *2767*63342#
2. *2767*3855#
3. *2767*2878#
4. *2767*927#
5. *2767*7822573738
____________________________________________
Samsung S307
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
____________________________________________
Samsung S500
*2767*3855#
In newer phones:
*2767*927#
____________________________________________
Samsung SGH600, SGH2100
*2767*3855#
*2767*2878#
____________________________________________
Samsung v200 unlock codes
Enter these codes into phone without sim in phone
This will not work on some new versions
1. *2767*63342# then press green button
2. *2767*3855# then press green button
3. *2767*2878# then press green button
4. *2767*927# then press green button
5. *2767*7822573738# then press green button
____________________________________________
Samsung X100, X600
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones:
#*7337#
____________________________________________
Samsung Universal
TEMPORARY UNLOCK:
Put a non-accepted Simcard and turn it on. Type *#9998*3323#.
Press Exit. You will get a new menu. Select Malloc Fail.
In newer phones:
#*7337#

Sebagian Kerusakan Pada Panasonic

Selasa, 04 Mei 2010
>Tegangan output regulator over.

Jika ini tidak segera diatasi akan mengakibatkan kerusakan-kerusakan yang lebih fatal. Kerusakan ini dapat kita ketahui dengan gejala-gejala awal sbb;
- Saat pertama tv dihidupkan tidak segera menagkap siaran, baru setelah beberapa saat normal. Hal ini disebabkan kurang stabilnya tegangan supply untuk VT tuner akibat overnya tegangan out put regulator saat pertama dihidupkan.
- Shortnya ZD pada teg Supply untuk VT tuner, jika ini terjadi maka saat tv kita onkan tv tidak mau hidup dan ada bunyi "ngiiik".
Untuk mengatasi problem regulator over ini kita harus mengganti semua elco yang nilainya 47 mikro pada rangkaian regulator. Jika elco telah kita ganti tegangan tetap over maka, cek resistor826 yang nilainya 22ohm, biasanya putus.

>Relay bunyi "ceklek-ceklek", tv tidak mau on.
Kerusakan biasa terjadi pada R803 yang nilainya 470k.

>Disearching lewat, difine-tuning bisa.
Cek teg pada AFT out pin 30 IC AN5192K, jika tak ada tegangan, biasanya ZDnya short.

>Jika terkena gambar yang terang(terlalu kontras) tv mati, led merah hidup.
R525 putus, nilainya 22k.

>Gambar normal tidak ada suara, IC audio normal. Ini sering kali terjadi.
kerusakan dioda disebelah IC audio, letaknya dipinggir PCB, ganti dengan D 4007.

>Untuk masuk kemenu servis mode: tekan V- pada tv dan Disply pada remot, untuk keluar tekan "N"(normal) pada remot

ABG Text Generator

Teks Normal    Teks ABG
  
HuRUf bEsAr keCil      
P4k3 4n9k4 D0n9      
Disngkt-sngkt      
     

Experience


Sony KV-E2531 etc

KV-E2931,KV-E3431,AE-2
CTV Enter Service mode
Turn on the main power switch of the set while pressing any two buttons on the front panel. 'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC. In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.

Option Mode polytron mx 5213

option 0 01000101 45h option 1 10010010 92h option 2 00001001 09h option 3 00001101 0dh option 4 00010000 10h option 5 00000000 00h option 6 00000001 01h tv polytron dengan fasilitas ada radionya

Option Mode Polytron MX5203MS

- POLYTRON MX5203MS
OPTION0: 00111010
OPTION1: 10001110
OPTION2: 11000011
OPTION3: 00001100

Default setting
RGB Cut Off: 60
APR: 15
AVL: 0
Bass Mix: 0
Last Cond. Super Bass: ON
Setting surround: 60

- OptionMenu HBM-00-00
masuk ke Factory Mode password 1014
setting default untuk MX5203MS, untuk model yang lain silahkan coba2.

Option Mode Polytron MX 20323T

AGC GAIN =26H. U-BLK =08H. HI-AGC=1AH. B-CUT=70.
OPTIONO =01000011. V-BLK =08H. H-SIFT=08. G-CUT=87.
OPTION1 =10011010. BRTS =OOH H-BOW=04. R-CUT=32.
OPTION2=:00001001. Y DELAY =07. H-PARA=06. V-AMPL=32.
OPTION3=:00011100. WB BRI =46H. S-COR=27. V-CENT=24
H-OSD =23H. WB CON =64H. V-LIN=15.
V-OSD =16H. WB COL=32H. B-DRV=64.
V-SHIFT =00H. LO-AGC=19H. G-DRV=46.

Service Menu Boomba

Use type LC8632 series
Press menu on remote control two times - recall Q.View - MUTE.

Service Menu Sony

Tekan power >> tekan disply >> 5 >> volume+ >> power

Service Menu Sanyo

menu di remot + volume up di tv

Service Menu JVC

Cara 1 :
Tekan osd + mute

Cara 2 :
>Tekan picture mode + display bersamaan.
>Untuk save data tekan display

Service Menu Samsung Plano

posisi stnby tekan disply di remote >> menu >> mute >> power

Service Menu Akari

Tekan slep di remot + menu di tv

Service Menu Sanken

Tekan mute pada remot >> menu di TV

Service Menu Harco

buka remot ada tulisan tes >> tekan >> 32156

Service Menu Mitsuno

Tekan menu di TV tv >> tekan mute pada remot 5 detik

Service Menu Sanken

Enter service mode Sanken TV Chasis AT Press MENU button, input the number 6483 or 4683 or 6597
Select value parm press Pro +/- and change value press vol +/-

Service Menu Digitec

Turn on TV in stby mode
Press and hold the menu buton on remote control till tv set is turn on.
input the number 1,0,1,3 or 1,0,1,4.
Change item move up or down program key
To select value press Volume + or -. To change value.
Store press menu button.
 
 
 

TV Menu Service

Monitor Menu Service

Protection

 
Created By : eethon noor